Arturia JUPIITER-8V User Manual download pdf (Page 70)

___________________________________________________________________________________

ARTURIA – JUPITER-8V – MANUAL - EN

• The tuning parameter (“FREQUENCY”) allows you to tune the oscillator by semi-tones on

range of 5 octaves.

• The fine tuning parameter (“FINE”) finely tunes the oscillator upwards by a semi-tone. This

parameter gives a bit more life to your sound when you use several oscillators

simultaneously, due to difference in frequencies between the oscillators.

The waveform which determines the harmonic richness of the audio signal. On the Jupiter-8V, four

waveforms are available:

• The saw tooth wave presents the richest audio signal of the available waveforms (it

contains all of the harmonics at decreasing volume levels in high frequencies). Its sound is

ideal for brass sounds, percussive bass sounds or rich pad sounds.

• The square wave possesses a more «hollow» sound that the saw tooth (it only contains odd

harmonics) but none the less, its rich sound (notably in low frequencies) can be used for

sub-bass sounds that will come out well in the mix (the square oscillator is often set an

octave below that of the saw tooth), wood sounds (clarinet, if the square signal is a little

filtered), etc.…

1 2 ... 65 66 67 68 69 70 71 72 73 74 75 ... 99 100

No comments

Arturia JUPIITER-8V User Manual Page 70